<<

G matrix
Generators (external)
GET
Global Limit Check
Global Resources
GPIB (external generator)
GPIB Address
   Introduction
   System Menu#GPIB_Address
   SYSTem#ADDRess
GPIB bus interface
GPIB bus messages
GPIB Explorer
   Introduction
   Introduction#GPIB_Explorer
GPIB Settings
Ground connector
GTL
Guided calibration

Hamming filter
Handshake bus
Hann filter
Hardcopy
   File Menu#Print
   HCOPy
Hardkey Bar
Hardware Info
Harmonic grid
Harmonic Power Cal
Harmonics
   Harmonic Distortion
   SENSe:FREQuency#CONVersion
    Example
HCOPy:DESTination
HCOPy:DEVice:LANGuage
HCOPy:ITEM:ALL
HCOPy:ITEM:LOGO[:STATe]
HCOPy:ITEM:MKRList[:STATe]
HCOPy:ITEM:TIME[:STATe]
HCOPy:PAGE:MARGin:BOTTom
HCOPy:PAGE:MARGin:LEFT
HCOPy:PAGE:MARGin:RIGHt
HCOPy:PAGE:MARGin:TOP
HCOPy:PAGE:ORIentation
   File Menu#Print_Setup_Dialog
   HCOPy#ORIentation
HCOPy:PAGE:WINDow
HCOPy[:IMMediate]
Help
    Key-controlled navigation
    Use
Help menu
Help System
Help Topics
Homepage
Horizontal Line
   CALCulate_DLINe
   Trace - Lines#Display_Line

Ibcntl
Iberr
Ibsta
ID string
IEC BUS
IEC SYSTEM BUS
IEC/IEEE Bus Interface
Iecwin32.exe
   Introduction
   Introduction#GPIB_Explorer
IEEE 488.2
IF filter
    types
IF frequency
IF Gain b
IFC
   GPIB Bus Interface
   GPIB Bus Interface#Interface_Messages
Imag
Imbalance
Immediate settings
Impedance
   Impedance Parameters
   Z Parameters
    converted
    input/output
    open-circuit
    transfer
Import Complex Data
Import Data to New Mem
Import File
Import Segment List
Import Segments
Import/Export Data
Impulse Response
INFintiy
   SCPI Parameters
   SCPI Parameters#Numeric_Values
Info
Initiate measurement
INITiate:CONTinuous
INITiate[:IMMediate]
INITiate[:IMMediate]:SCOPe
INPut:ATTenuation
Insert New Segment
   Define Segments#Adding_Segments
   SENSe_SEGMent#ADD
   SENSe_SEGMent#INSert
Insertion loss
Instrument
    Connecting
    Unpacking
Instrument hardware
   Command Processing
   Command Processing#Data_Set_and_Instrument_Hardware
Instrument Messages
Instrument settings (print)
Instrument Setup
INSTrument:PORT:COUNt?
Int. Reference
    external generator
Interface
    functions (GPIB bus)
    messages (GPIB bus)
Interface Clear
Interface message
    GPIB bus
    RSIB
Intermodulation measurement
Internal source power
INV
Inverted Smith
IP address
    assign
IST flag
   Status Registers#IST_and_PPE
   Status Reporting System

Jumper (front panel, ZVT)

K-factor
Keyboard
    on-screen
       Data Entry
       Dialogs#On_screen_keyboard
Keys
    data entry
    navigation
    on/standby
    rotary knob
    setup
    standby
Keyword (SCPI command)
   SCPI Command Structure and Syntax
   SCPI Command Structure and Syntax#Device_Specific_Commands

LAN
    cable
    connection
    DHCP
    LAN1, LAN2 connectors
    remote control
Landscape
LBE (Lower Band Edge)
   Bandfilter#Bandpass_Search
   Bandfilter#Bandstop_Search
LED
LED (test ports)
Limit Check On
   CALCulate_LIMit#STATe
   Trace - Lines#Limit_Check_On
Limit line
   CALCulate_LIMit
   Trace - Lines
    programming examples
       Creating Traces and Channels#Markers_and_limit_lines
       Traces, Channels and Diagram Areas
Limit register
Lin Mag
Lin. Frequency
   SENSe_Sweep
   Setting up a Sweep
   Sweep Type#Lin_Frequency
Line (standard)
   Add/Modify Standard#Calibration_Standard_Types
   Calibration Types
Linear 2-port
    stability
Lineup
List mode (external generator)
LLO
LO < RF
LO > RF
LO frequency
Load
Local Max
   CALCulate_MARKer
   Search Range#Def_Peak
Local Min
   CALCulate_MARKer
   Search Range#Def_Peak
Local Oscillator
Log. Frequency
   SENSe_Sweep
   Setting up a Sweep
   Sweep Type#Log_Frequency
Logical Port
Logical Port Number
Logo (print)
   File Menu#Print_Setup_Dialog
   HCOPy#LOGO
Loss
   Add/Modify Standard#Modify_Offset
   Bandfilter#Show_Results
Low Dist
Low First Sidelobe
Low Noise
Low Pass Mode (time domain)
low phase noise
Lower limit

Maintenance
Manual Entry (DC value)
Manual Trigger
   Trigger#Manual
   TRIGger#SOURce
Margin
   File Menu#Print_Setup_Dialog
   HCOPy#BOTTom
Marker
   Display Elements#Markers
   Marker
    delta
    discrete
    for bandfilter search
    format
       CALCulate_MARKer
       Marker#Mkr_Format
    info field
    info table
    menu
       CALCulate_MARKer
       Marker
    normal
    programming examples
       Creating Traces and Channels#Markers_and_limit_lines
       Traces, Channels and Diagram Areas
    properties
       CALCulate_MARKer
       Marker#Mkr_Properties
    reference
    switch on
       CALCulate_MARKer
       Marker#Marker_1_2_3
Marker Funct
    diagram scaling
Marker list (print)
   File Menu#Print_Setup_Dialog
   HCOPy#MKRList
Match (standard)
   Add/Modify Standard#Calibration_Standard_Types
   Calibration Types
Math = Data/Mem
   CALCulate_MATH#EXPRession_DEFine
   Trace Funct#Math___Data_Mem
Math = User Def
   CALCulate_MATH#EXPRession_SDEFine
   Trace Funct#Math___User_Def
Mathematical trace
   Display Elements#Trace_Types
   Trace Funct
Max
   Bandfilter#Bandpass_Search
   Trace - Scale#Max_and_Min
Max = Marker
Max Freq
Max Hold On
Max Search
   CALCulate_MARKer
   Search#Max_Search
Max. Detector
Maximize
   Control Menu
   Display Config#Maximize
   Window Menu
MAXimum
   SCPI Parameters
   SCPI Parameters#Numeric_Values
   Trace Eval#Statistical_Eval
MDATA1
Mean (arithmetic)
Mean/Std Dev
Meas Delay
   Define Segments
   Define Segments#Individual_Segment_Settings
   SENSe_SEGMent#DWELl
MEAS key
Meas. Bandwidth
   Power Bandwidth Average#Meas_Bandwidth
   SENSe:BANDwidth
   SENSe_SEGMent#BWIDth
    Define Segments
Meas. Delay
   Number of Points#Sweep_Time
   SENSe:SWEEP
Measure
    multiport S-parameters
    S-parameters
Measure Standards
Measurement channel
Measurement Speed
    Optimizing
Measurement Wizard
Measures a waves at
Mechanical Length
Memory trace
   Display Elements#Trace_Types
   Trace Funct
    coupling
MEMory:CATalog?
MEMory:DEFine
MEMory:DELete:ALL
MEMory:DELete[:NAME]
MEMory:SELect
Menu bar
Menu structure
Min
   Bandfilter#Bandstop_Search
   Trace - Scale#Max_and_Min
Min Freq
Min Search
   CALCulate_MARKer
   Search#Min_Search
Min/Max/Peak-Peak
Minimize
MINimum
   SCPI Parameters
   SCPI Parameters#Numeric_Values
   Trace Eval#Statistical_Eval
Mixed mode parameters
Mixer
Mixer and Harmonics (ZVB-K3)
   Harmonic Distortion
   Mixer Mode
Mixer frequencies
Mixer Power Cal.
MMEMory:AKAL:FACTory:CONVersion
MMEMory:CATalog:ALL?
MMEMory:CATalog?
MMEMory:CDIRectory
MMEMory:COPY
MMEMory:DATA
MMEMory:DELete
MMEMory:DELete:CORRection
MMEMory:LOAD:CKIT
MMEMory:LOAD:CKIT:SDATa
MMEMory:LOAD:CMAP
MMEMory:LOAD:CORRection
MMEMory:LOAD:CORRection:RESolve
MMEMory:LOAD:LIMit
MMEMory:LOAD:SEGMent
MMEMory:LOAD:STATe
MMEMory:LOAD:TRACe
MMEMory:LOAD:VNETworks:BALanced:DEEMbedding
MMEMory:LOAD:VNETworks:BALanced:EMBedding
MMEMory:LOAD:VNETworks:SENDed:DEEMbedding
MMEMory:LOAD:VNETworks:SENDed:EMBedding
MMEMory:MDIRectory
MMEMory:MOVE
MMEMory:MSIS
MMEMory:NAME
MMEMory:RDIRectory
MMEMory:STORe:CKIT
MMEMory:STORe:CMAP
MMEMory:STORe:CORRection
MMEMory:STORe:LIMit
MMEMory:STORe:MARKer
MMEMory:STORe:SEGMent
MMEMory:STORe:STATe
MMEMory:STORe:TRACe
Mode
Mode conversion factor
Modify Calibration Kit
Modify External Generator
Modify External Power Meter
Modify Load
Modify Offset
Modify Source Power Cal Settings
Modify Standard
MONITOR
    connection and use
    connector
More Harmonics...
More Markers
   CALCulate_MARKer
   Marker#More_Mkrs
More Mem
More Ratios
More S-Parameters
More Wave Quantities
More Y-Parameters
More Z-Parameters
Mouse
Move
mu1-factor
mu2-factor
Multiport
   Trace - Measure
   Z Parameters
    S-parameters
    Z-parameters

>>